
Taking Your Diagnosis Through To The End - What Blew The Fuse?
video description
Date: 2020-08-05
Comments and reviews: 9
caprice572009
Eric, The only thing I did not see you verify was the grounds. Now I know you and others might say they are good because the fans worked, but we both know that is not 100% accurate. Just like the fans didn't blow the fuse while you had it running in the bay, so they must be fine.
Not saying the grounds were at fault, but if they were corroded, they would add resistance to the circuit and up the amp draw. I agree the one fan was fersnickered, but I didn't see you verify the ground circuit. We both live in rustophukinwonderful areas and that should have been done. I know because I have had it bite me in the past.
reply
Eric, The only thing I did not see you verify was the grounds. Now I know you and others might say they are good because the fans worked, but we both know that is not 100% accurate. Just like the fans didn't blow the fuse while you had it running in the bay, so they must be fine.
Not saying the grounds were at fault, but if they were corroded, they would add resistance to the circuit and up the amp draw. I agree the one fan was fersnickered, but I didn't see you verify the ground circuit. We both live in rustophukinwonderful areas and that should have been done. I know because I have had it bite me in the past.
reply
Glen
You said you were not sure why you made this video, well I could see right at the start that this was an issue that needed to be told! Now I digress for a moment, you are such a humanitarian, I know of no shop that would go through what you do to save someone some cash. With that said, you id a great service showing people why you cannot just replace a fuse and walk away. In my mind as was yours, there would always be the question of why did the fuses blow? There is always a reason.
reply
You said you were not sure why you made this video, well I could see right at the start that this was an issue that needed to be told! Now I digress for a moment, you are such a humanitarian, I know of no shop that would go through what you do to save someone some cash. With that said, you id a great service showing people why you cannot just replace a fuse and walk away. In my mind as was yours, there would always be the question of why did the fuses blow? There is always a reason.
reply
Bob
Eric, I loved this video when it was new, just watched again. It is awesome to find how much you can discover about how it is working while it is working. I watched Scanner Danner do the same with a fuel pump motor, even calculating the pump's rpm by the time base on a pulse width modulated pump. You do great work building the integrity of your trade. Thank you.
reply
Eric, I loved this video when it was new, just watched again. It is awesome to find how much you can discover about how it is working while it is working. I watched Scanner Danner do the same with a fuel pump motor, even calculating the pump's rpm by the time base on a pulse width modulated pump. You do great work building the integrity of your trade. Thank you.
reply
autos
Your tagline If I can do it. isn't true any more. You do a better job of diagnosis and have a better understanding of what is happening than many professional mechanics. Without that understanding being able to take things apart and re-assemble them while following a manufacturer's procedure is not much more effective than throwing parts at a problem.
reply
Your tagline If I can do it. isn't true any more. You do a better job of diagnosis and have a better understanding of what is happening than many professional mechanics. Without that understanding being able to take things apart and re-assemble them while following a manufacturer's procedure is not much more effective than throwing parts at a problem.
reply
autos
Eric, you my friend are what they refer to in this business as a, REPUTABLE MECHANIC. I'd let you work on my car, with my family in it! Lol. Great work and with your integrity, you are guaranteed to always have full bays and a full cash drawer! Take care. Jpol. Remember. more old school diagnosis. Please and Thank you.
reply
Eric, you my friend are what they refer to in this business as a, REPUTABLE MECHANIC. I'd let you work on my car, with my family in it! Lol. Great work and with your integrity, you are guaranteed to always have full bays and a full cash drawer! Take care. Jpol. Remember. more old school diagnosis. Please and Thank you.
reply
Dave
This is a few years old and I am a bit late, but if you ever suspect an intermittent short to ground you can disconnect both side of the wire and put a megohmeter on it and see if the insulation is compromised. Putting 1000v on it will cause voltage to jump any short gaps and that shows up on the meter.
reply
This is a few years old and I am a bit late, but if you ever suspect an intermittent short to ground you can disconnect both side of the wire and put a megohmeter on it and see if the insulation is compromised. Putting 1000v on it will cause voltage to jump any short gaps and that shows up on the meter.
reply
spelunkerd
Outstanding video, I'm glad I didn't miss this one! And, hurray for old style junk yards, it's nice to see you found one. My junk yards locally won't even let me walk through their yard, their insurance won't permit it. Mostly they trash anything they can't sell right away.
reply
Outstanding video, I'm glad I didn't miss this one! And, hurray for old style junk yards, it's nice to see you found one. My junk yards locally won't even let me walk through their yard, their insurance won't permit it. Mostly they trash anything they can't sell right away.
reply
PAULY'S
Eric I've been on a roll rewatching and catching up on your videos, but I really loved this one, because you are teaching a very valuable lesson on finding out the why. excellent!
Also, thanks for sharing the waveforms on the before and after. very valuable for learnin'!
reply
Eric I've been on a roll rewatching and catching up on your videos, but I really loved this one, because you are teaching a very valuable lesson on finding out the why. excellent!
Also, thanks for sharing the waveforms on the before and after. very valuable for learnin'!
reply
Mike
Prior to scope testing, I had an older Sears Craftsman combination Voltage/Current (up to 100 Amps using a shunt, Dwell (for contact points and the old GM Mixture Control Solenoid) and RPM. The Current got the most use, and although it was an analog meter. IT WORKED!
reply
Prior to scope testing, I had an older Sears Craftsman combination Voltage/Current (up to 100 Amps using a shunt, Dwell (for contact points and the old GM Mixture Control Solenoid) and RPM. The Current got the most use, and although it was an analog meter. IT WORKED!
reply
Add a review, comment
Other channel videos















