• Vehicles • Fashion • Recipes • Blogs • Hunt • Travels • Sport • Fun • Handmade • IT • Education
Mini-Games
x

x
zakruti.com » Auto & Vehicles » South Main Auto Repair
Dodge Neon: Engine Light On / Limp In Mode

Dodge Neon: Engine Light On / Limp In Mode

FBTwitterReddit

video description

Rating: 4.0; Vote: 1
Come along with Eric O. at the SMA shop as he has a look at this Dodge Neon that was dragged in with the engine light on and the transmission stuck in limp mode, meaning it won't shift. He discovers and repairs the problem in the harness pretty quickly but we soon find out that there is likely more to the story than we were told
Date: 2020-08-05

Comments and reviews: 10


although you stated that the high switch rate on the rear o2 was like the upstream indicating the converter had seen better days, the Chrysler scanner seemed to show fuel trims that at a quick glance appeared to be possibly trimming out a rich condition would it have been good to check that and advise the customer of the rich condition that would possibly contribute to the converter failure so a future replacement of the converter and a diag for a rich condition? Just curious
reply

You're videos are my main source of entertainment. While I'm on leave of absence from a major airline.
I'm a 58 year old Airline Mechanic probably about to get furloughed. I owned my own auto repair shop from 1988 to 2004, when I sold it and got out of So. Florida.
My contingency plan is to start working on vehicles again, probably for an independent shop.
Do I need my head examined?
BTW you got all the cool tools.
Love that Autel Scanner.

reply

I can't believe I'm publically admitting this, I owned (very briefly) a '95 Neon. An absolute TURD, especially the automatic transmission. It had a persistent fluid leak coming from the right axle. It was so bad, the manager made me park somewhere other than the carport. I finally replaced the seal on a Saturday behind a Kmart across the street. It was SUCH a pain, I nearly had to disassemble the entire right-front suspension to replace a 20 seal.
reply

10: 47: I didnt count the times Ive installed a socket or plug on an extension cable without putting the housing of it onto the cable first. I always hope to mess up the first side only so I can hopefully just slide the housing over 25m (82ft) of cable
But it was more times than I would be willing to admit that I had to redo it in the correct sequence.

reply

Same thing happened to mine. Shop tried to sell me a trans rebuild before even pulling in the garage.
Year later a newer chevy cruze hit me head on, texting. My neon folded up, battery thru the windshield. The cruze. busted headlight and cracked bumper.

reply

As a fibre optics engineer I know that Kevlar (or aramid) will definitely blunt your scissors but when I got Kevlar scissors they are absolutely the dogs danglies! Ive had mine several years, get used everyday and are still as sharp as the day I opened the box!
reply

I like the super 33 tape very good tape. Huge difference between your cheaper brands. I also like Scott's splicing packing tape and the friction tape as well. One small item where brand name stands out above all others Scott's 3 M Good Job again Eric
reply

my first car was a plymouth neon. still have it and i love that car. its been sitting for a few years because it kept eating through flex plates and by the time i got the 2nd replacement bolted to the crank i was over it. now i drive a 1975 mustang
reply

I suggest a heat gun for Heat Shrink. No open flame and easy to control the heat. Also leaves a better appearance. Some are capable of soldering such as the use of Heat Shrink with a solder ring inside.
reply

I don't remember what electrical tape I used in the past, but it was also like heart shrink. So after you put the tape on and use a heat gun on the tape it would act like heat shrink tubing, was very nice.
reply
Add a review, comment






Other channel videos