EPIC FAIL WITH CLONE A WILLY TRAINING HAND - AGAIN
video description
Date: 2019-10-31
Related videos
Comments and reviews: 10
ivoryandcat
Ok, so I took special effects design in college. I was good enough at mold making I ended up teaching that part of the class and doing it professionally. So cold water gives you a longer time before the mix kicks. So don't use hot or warm water unless you know what you're doing. Put the water in, then sprinkle in your powder, give it time to absorb in before you mix and sprinkle in little bits at a time until it is all in. Only mix after you have all of the powder dampened in the water. The mix won't start to kick until you start to mix so don't mix through the whole time, and don't add extra water.
reply
Ok, so I took special effects design in college. I was good enough at mold making I ended up teaching that part of the class and doing it professionally. So cold water gives you a longer time before the mix kicks. So don't use hot or warm water unless you know what you're doing. Put the water in, then sprinkle in your powder, give it time to absorb in before you mix and sprinkle in little bits at a time until it is all in. Only mix after you have all of the powder dampened in the water. The mix won't start to kick until you start to mix so don't mix through the whole time, and don't add extra water.
reply
Dana Brown
If you had read ur comments on the fails before, you would have poured the water into the powder then WHISK And always remember to throughly read ALL directions of the product, then follow through as you go I don't know everything, but that's just how I feel. I hope to see another video where you do all the right steps and come out successful. Love all of ur videos and laugh at u all the time You are sooooo funny So thanks for how real u are Wish you the best hun
reply
If you had read ur comments on the fails before, you would have poured the water into the powder then WHISK And always remember to throughly read ALL directions of the product, then follow through as you go I don't know everything, but that's just how I feel. I hope to see another video where you do all the right steps and come out successful. Love all of ur videos and laugh at u all the time You are sooooo funny So thanks for how real u are Wish you the best hun
reply
Rain Lluvia
Imagine somebody stirring it and say stick it in because already hardened just like in your video but in this scenario it would be the dick and I'm pretty sure when they're like hurry up stick it in by the time you make yourself like that they're not going to be horny and it's not going to be up anymore is going to be soft lmao
reply
Imagine somebody stirring it and say stick it in because already hardened just like in your video but in this scenario it would be the dick and I'm pretty sure when they're like hurry up stick it in by the time you make yourself like that they're not going to be horny and it's not going to be up anymore is going to be soft lmao
reply
Nailed By Chance
This was hilarious. The issue was Kirsty first said 1 3/4c which is 420ml so you needed 840ml for 2 kits. 1 US Cup is 240ml. Then Adam said 3 1/14, then you changed it to 1 1/4cups. If it was 1 3/4 cups you were short by 240ml. Now, I say try it again with the correct measurements, because I want to see it work.
reply
This was hilarious. The issue was Kirsty first said 1 3/4c which is 420ml so you needed 840ml for 2 kits. 1 US Cup is 240ml. Then Adam said 3 1/14, then you changed it to 1 1/4cups. If it was 1 3/4 cups you were short by 240ml. Now, I say try it again with the correct measurements, because I want to see it work.
reply
SubversiveStyle
Just buy alginate for life casting and experiment with water temps from Luke warm to warm ish but the warmer the faster it cures. Be sure stuff you get is skin safe, including plaster, latex, etc. if you go either route. I used cake mixer but first time is trial and error. Lmao you made something pervy after all
reply
Just buy alginate for life casting and experiment with water temps from Luke warm to warm ish but the warmer the faster it cures. Be sure stuff you get is skin safe, including plaster, latex, etc. if you go either route. I used cake mixer but first time is trial and error. Lmao you made something pervy after all
reply
Johannes Halberstadt
Well. first, there was the measuring mistake. Second, for the willie they want the alginate to harden quickly, so the guy doesn't have to be in there for long, as it might be difficult to keep the shape the same for longer. If you want it to set less quickly, use cooler water or a tiny bit more water.
reply
Well. first, there was the measuring mistake. Second, for the willie they want the alginate to harden quickly, so the guy doesn't have to be in there for long, as it might be difficult to keep the shape the same for longer. If you want it to set less quickly, use cooler water or a tiny bit more water.
reply
molissa allen
You should put the powder in a bowl, measure the water then pour the water in the powder until creamy like a soft pudding. Use a spatula to mix along the sides of the bowl to burst the bubbles of powder. Then it should be the right consistency to pour into a mold and place her hand in. Wait until set.
reply
You should put the powder in a bowl, measure the water then pour the water in the powder until creamy like a soft pudding. Use a spatula to mix along the sides of the bowl to burst the bubbles of powder. Then it should be the right consistency to pour into a mold and place her hand in. Wait until set.
reply
Morgan
sieve the powder before you put it in the water like flour in a cake Idea - clone a willy first and learn from it, then alter the process accordingly and do a hand using a better method lol Another idea - press her hand into a tray on the horizontal rather than sticking it into a container vertically
reply
sieve the powder before you put it in the water like flour in a cake Idea - clone a willy first and learn from it, then alter the process accordingly and do a hand using a better method lol Another idea - press her hand into a tray on the horizontal rather than sticking it into a container vertically
reply
Romanyfaye
Ive tried using that alginate stuff to make a face cast, failed so many times lol. Try maybe putting the container with Dawns hand inside another container with hotter water instead of using hairdryer to heat and set it. (Hope makes sense) maybe that will set it quicker without burning her
reply
Ive tried using that alginate stuff to make a face cast, failed so many times lol. Try maybe putting the container with Dawns hand inside another container with hotter water instead of using hairdryer to heat and set it. (Hope makes sense) maybe that will set it quicker without burning her
reply
Jen O'Flaherty
Stick the vibrator inside the hand, and ya have a massage hand. Handy or what a random thought. I'd love to try these, make my own training hand, cant wait, thanks for sharing. Xx those lil fingers popped out and i think i left my body for a sec. Im like, what? needed that cheers crew.
reply
Stick the vibrator inside the hand, and ya have a massage hand. Handy or what a random thought. I'd love to try these, make my own training hand, cant wait, thanks for sharing. Xx those lil fingers popped out and i think i left my body for a sec. Im like, what? needed that cheers crew.
reply
Add a review, comment
Other channel videos
