
Toyota Tundra - Front Brakes
video description
Date: 2020-08-05
Related videos
Comments and reviews: 10
codemiesterbeats
ha ha Ive done a couple of these style setups. I been unclipping the hardline to give me some movement to get the rotors off. I don't recall seeing that bracket on the ones I did but am going to feel like a moron the next time I get one and see it lol
You departed some knowledge to me so maybe I can help back, on this toyota 4 piston setup I find it easiest to use 2 screwdrivers/prybars to depress the caliper pistons. You can catch a bit of a lip at the top and bottom of the pads and once they budge you can stick both your tools in there (on friction surface) and just pry them back.
reply
ha ha Ive done a couple of these style setups. I been unclipping the hardline to give me some movement to get the rotors off. I don't recall seeing that bracket on the ones I did but am going to feel like a moron the next time I get one and see it lol
You departed some knowledge to me so maybe I can help back, on this toyota 4 piston setup I find it easiest to use 2 screwdrivers/prybars to depress the caliper pistons. You can catch a bit of a lip at the top and bottom of the pads and once they budge you can stick both your tools in there (on friction surface) and just pry them back.
reply
Francisco
Ey main auto I got a question I was doing the pads on an 08 tundra 2wd first time working on a vehicle like this I took off the caliper screws off basecly I open the caliper n thighten every thing on n it leak by the screws any idea wat happen does it have any o rings or seals between?
reply
Ey main auto I got a question I was doing the pads on an 08 tundra 2wd first time working on a vehicle like this I took off the caliper screws off basecly I open the caliper n thighten every thing on n it leak by the screws any idea wat happen does it have any o rings or seals between?
reply
Jake
Those calipers are the same as the LandCruiser brakes we have here in Australia, to make pad changes quicker I use a Sidchrome trigger type brake pad spreader directly on the old pads to push the pistons back evenly, before pulling the pads, the tool is cheap, like 60 AU cheap.
reply
Those calipers are the same as the LandCruiser brakes we have here in Australia, to make pad changes quicker I use a Sidchrome trigger type brake pad spreader directly on the old pads to push the pistons back evenly, before pulling the pads, the tool is cheap, like 60 AU cheap.
reply
Tim
Eric, I dont know if it would be possible, but a helpful quick 5 second tip would be. show where you put your lift pads on each vehicle. Im sure its second nature to you. But, I always struggle. especially with trucks where to lift at. Thanks!
reply
Eric, I dont know if it would be possible, but a helpful quick 5 second tip would be. show where you put your lift pads on each vehicle. Im sure its second nature to you. But, I always struggle. especially with trucks where to lift at. Thanks!
reply
Slade
thanks for creating this video. you've already saved me over 500 from the dealer with your sonata brake rotor video. Now that i have a Tundra, I can also save about 600 from the dealer by doing this job myself! thanks bud! long time subber.
reply
thanks for creating this video. you've already saved me over 500 from the dealer with your sonata brake rotor video. Now that i have a Tundra, I can also save about 600 from the dealer by doing this job myself! thanks bud! long time subber.
reply
autos
I bought my pre-owned 2010 Tundra in 2015 and must say its almost too dependable. You have a tendency to take things for granted with these vehicles because theyre so damn reliable. These DIY vids are great
reply
I bought my pre-owned 2010 Tundra in 2015 and must say its almost too dependable. You have a tendency to take things for granted with these vehicles because theyre so damn reliable. These DIY vids are great
reply
Neill
This guy is real. I never go to service centre mechanics I just look for independent operatives that do a bit of diagnosis first. I would trust this bloke. Cost is important but quality of work is King.
reply
This guy is real. I never go to service centre mechanics I just look for independent operatives that do a bit of diagnosis first. I would trust this bloke. Cost is important but quality of work is King.
reply
M&S
Ahh rust you say can be causing the noise. I have a 2014 with 35, 000 miles. Im hard on the pedal sometimes but always coast to red lights and stop signs. time to pull the wheel off. thanks for the video
reply
Ahh rust you say can be causing the noise. I have a 2014 with 35, 000 miles. Im hard on the pedal sometimes but always coast to red lights and stop signs. time to pull the wheel off. thanks for the video
reply
John
I'd also vote yes. Although I see this vid is two years old. Weirdly satisfying seeing fluid changes and preventative maintenance. And I don't own a Tundra and am not a mechanic. Hahaha!
reply
I'd also vote yes. Although I see this vid is two years old. Weirdly satisfying seeing fluid changes and preventative maintenance. And I don't own a Tundra and am not a mechanic. Hahaha!
reply
Charles
Eric, I like your live videos. The mistakes are just what a DIYer would do. This was very interesting as Toyota is so different from other manufacturers. Keep up the great work.
reply
Eric, I like your live videos. The mistakes are just what a DIYer would do. This was very interesting as Toyota is so different from other manufacturers. Keep up the great work.
reply
Add a review, comment
Other channel videos















