Installing GIANT FISH FEEDERS in My BACKYARD POND! (Feeding Frenzy)
video description
and you could even go with a 6. 8 spc, or 300 black out upper for it as well depending on what you want
your lower will take any ar15 upper so save the money for ammo
Date: 2020-08-19
Related videos
Comments and reviews: 9
DR
Flair you need to have Rob come over and teach you about getting your DOPE on any rifle. If your rifle is zeroed at 100yd but the target it at 400yd, what elevation do you dial or hold? Also, .223 vs 6. 5cm is no contest for distance, accuracy and take down power - 6. 5 will win every single time. Want to see you get that coyote!
reply
Flair you need to have Rob come over and teach you about getting your DOPE on any rifle. If your rifle is zeroed at 100yd but the target it at 400yd, what elevation do you dial or hold? Also, .223 vs 6. 5cm is no contest for distance, accuracy and take down power - 6. 5 will win every single time. Want to see you get that coyote!
reply
Eric
That AR15 had an FSB (Front site base) and we always drilled them on so if you did manage to take it off, depending on who assembled it, you'd have drill marks on the barrel. That's why I'd always get rail setups on AR15 so your not stuck with only an FSB set-up.
reply
That AR15 had an FSB (Front site base) and we always drilled them on so if you did manage to take it off, depending on who assembled it, you'd have drill marks on the barrel. That's why I'd always get rail setups on AR15 so your not stuck with only an FSB set-up.
reply
Carson
I m not sure if you will see this but to sight in a gun what I do and it s very effective. Shoot at 30 yards and see where the bullet hole is then go from the bullsey to the bullet hole just moving the scope and then shoot again and it should be dead on
reply
I m not sure if you will see this but to sight in a gun what I do and it s very effective. Shoot at 30 yards and see where the bullet hole is then go from the bullsey to the bullet hole just moving the scope and then shoot again and it should be dead on
reply
Calvin
You need to get some wood 4x4's to bolt onto the feet of those feeders. It will lift them a little and it will keep the metal off the ground so that the feet don't rust. That metal sitting on dirt will start to rust pretty fast.
reply
You need to get some wood 4x4's to bolt onto the feet of those feeders. It will lift them a little and it will keep the metal off the ground so that the feet don't rust. That metal sitting on dirt will start to rust pretty fast.
reply
Colby
That front iron sight is your gas block too, can t remove without swapping blocks out and the A2 style are hard af to remove. I d take a rotary cutter and just chop the sight off and leave the base/block in tact
reply
That front iron sight is your gas block too, can t remove without swapping blocks out and the A2 style are hard af to remove. I d take a rotary cutter and just chop the sight off and leave the base/block in tact
reply
David
Pond management, DRAIN/DREDGE/REFILL. If it refills too slowly. dig a well/get a windmill. Read a book or hire someone on how it's done. Too many blue gills are bad, too many bass are bad, too many weeds are bad.
reply
Pond management, DRAIN/DREDGE/REFILL. If it refills too slowly. dig a well/get a windmill. Read a book or hire someone on how it's done. Too many blue gills are bad, too many bass are bad, too many weeds are bad.
reply
Frogassassin
My favorite gun for deer is a 6. 5 and i have dropped every deer I have shot but I recommend Winchester deer season bullets I have never had a deer run after shooting them with them
reply
My favorite gun for deer is a 6. 5 and i have dropped every deer I have shot but I recommend Winchester deer season bullets I have never had a deer run after shooting them with them
reply
Kyle
Try to not to yank the trigger. In the military the tell you to surprise yourself when u pull the trigger because when you pull on it u move the target all over the place
reply
Try to not to yank the trigger. In the military the tell you to surprise yourself when u pull the trigger because when you pull on it u move the target all over the place
reply
Wombbatts
THERMAL You can get a picatinny spacer block that will raise the scope about an inch. Ebay See-Thru Flat Top Tri-Rail Picatinny 1 Riser Mount Fit 20mm Base
reply
THERMAL You can get a picatinny spacer block that will raise the scope about an inch. Ebay See-Thru Flat Top Tri-Rail Picatinny 1 Riser Mount Fit 20mm Base
reply
Add a review, comment
Other channel videos
