RTX 3080 LHR for Mining (Hashrate, Overclocks & Profit for Ethereum, Ravencoin, Flux, Firo & Ergo) - Sebs FinTech
video description
Date: 2022-04-19
Related videos
Comments and reviews: 10
Jose
This is pretty old so i dont know if you are going to see this but i have been mining with 3080 on RaveOS but y cant get them to more than 66mh/s. I know that RaveOs allows to use commands for locking the memory and core clock but i cant find any place to get those commands. Do you have any idea on what i should do?
reply
This is pretty old so i dont know if you are going to see this but i have been mining with 3080 on RaveOS but y cant get them to more than 66mh/s. I know that RaveOs allows to use commands for locking the memory and core clock but i cant find any place to get those commands. Do you have any idea on what i should do?
reply
itech
Id like to run my card a little cooler and not for max effiency. Im new here and want to test this out a bit. For ETH, Anyone got a good overclock where mem temps are around 80-85? With lower fan noise. This is my gaming comp in my bedroom. Cant have it blast full power all night
reply
Id like to run my card a little cooler and not for max effiency. Im new here and want to test this out a bit. For ETH, Anyone got a good overclock where mem temps are around 80-85? With lower fan noise. This is my gaming comp in my bedroom. Cant have it blast full power all night
reply
Berkcan
Hello. I have a problem with my MSI Gaming Trio 3080 LHR cards. I have 3 of them however, I could not get +69 Mhs on HiveOs. Also I have high load average problem which is around 2.50. Can someone please help me? Drivers are 470.86. Thank you so much. I really need help
reply
Hello. I have a problem with my MSI Gaming Trio 3080 LHR cards. I have 3 of them however, I could not get +69 Mhs on HiveOs. Also I have high load average problem which is around 2.50. Can someone please help me? Drivers are 470.86. Thank you so much. I really need help
reply
Mauricio
I'm just starting with mining I have a really basic question. I've seen differents OS that boots from a usb drive. I can see you adjusting the power with MSI afterburner. In case if i don't have windows installed, can I adjust the power of the cards? Thanks!
reply
I'm just starting with mining I have a really basic question. I've seen differents OS that boots from a usb drive. I can see you adjusting the power with MSI afterburner. In case if i don't have windows installed, can I adjust the power of the cards? Thanks!
reply
Alexandre
Seb i don't understand how you pull only 220w on Flux 81 sol/sec can you confirm there is no mistake ? with 3080 LHR on Gminer i can't reach this. Any setting we try to get 80/85 sol/sec is 300w, i don't understand of you reduce power usage so much. thanks
reply
Seb i don't understand how you pull only 220w on Flux 81 sol/sec can you confirm there is no mistake ? with 3080 LHR on Gminer i can't reach this. Any setting we try to get 80/85 sol/sec is 300w, i don't understand of you reduce power usage so much. thanks
reply
NABILA
can you help me
I have zotac 3080 amp holo lhr edition
I try to overlock by watching you video
but at first I get around 72-74 mhs but after 30 to 40 it drop to 62-65 mhs and continues
any overlock setting suggested for me
Thanks to KIWI
reply
can you help me
I have zotac 3080 amp holo lhr edition
I try to overlock by watching you video
but at first I get around 72-74 mhs but after 30 to 40 it drop to 62-65 mhs and continues
any overlock setting suggested for me
Thanks to KIWI
reply
rathanak
Hello bro can you help me. my rtx 3080 LHR cant get over 60 hash rate I try T. rex / Nbminer both the same if I increase the memory clock the hash rate just dropping, I even try lower the memory only stock setting give the highest hash rate 61h.
reply
Hello bro can you help me. my rtx 3080 LHR cant get over 60 hash rate I try T. rex / Nbminer both the same if I increase the memory clock the hash rate just dropping, I even try lower the memory only stock setting give the highest hash rate 61h.
reply
Big
Hi Seb having 100% in the power limit for ETH isnt it too much?
I just tried your settings:
Power limit: 100%
Temp limit: 83
Core clock: 0
Memory clock: +1500
Fan speed: 80
Getting 65-70mh/s on nbminer
reply
Hi Seb having 100% in the power limit for ETH isnt it too much?
I just tried your settings:
Power limit: 100%
Temp limit: 83
Core clock: 0
Memory clock: +1500
Fan speed: 80
Getting 65-70mh/s on nbminer
reply
Frizzante
Is your card re-padded? My mem junction temp when mining on a strix 3080 is 90-96. Yours seem to be really cool and considering its a gigabyte, I'm assuming you re-padded the thermal pads?
reply
Is your card re-padded? My mem junction temp when mining on a strix 3080 is 90-96. Yours seem to be really cool and considering its a gigabyte, I'm assuming you re-padded the thermal pads?
reply
Michael
How do you determine your absolute core clock value? I understand the rest of the process, but not how you determine this value that's inserted directly into Trex. Can you explain further?
reply
How do you determine your absolute core clock value? I understand the rest of the process, but not how you determine this value that's inserted directly into Trex. Can you explain further?
reply
Add a review, comment
Other channel videos
