Toyota Camry: Front Brake Pads & Rotors
video description
Date: 2020-08-05
Related videos
Comments and reviews: 9
Anonymous98
At the end, did I see a brand new, shiny blue car lift, supplied by Not-a-Sponsor. Thanks for the tips on the brake job. Was the old grease that locked the caliper pin a petroleum-based grease or a some of that 3M/Permatex silicone caliper grease? You really set a new standard on cleaning caliper brackets. The nylon gun-cleaning brush on the drill was a hit; and thanks for supporting America's Brake Kleen industry - if they aren't a sponsor, they should be.
reply
At the end, did I see a brand new, shiny blue car lift, supplied by Not-a-Sponsor. Thanks for the tips on the brake job. Was the old grease that locked the caliper pin a petroleum-based grease or a some of that 3M/Permatex silicone caliper grease? You really set a new standard on cleaning caliper brackets. The nylon gun-cleaning brush on the drill was a hit; and thanks for supporting America's Brake Kleen industry - if they aren't a sponsor, they should be.
reply
jorge
From a business perspective, you being a straight shooter is the way to go. This way the customer always knows where they stand. A properly done job is easy to defend and the customer will be back as well as the fact that in today's time, with social media, everybody knows what you are doing. Good or Bad. Keep up the great work!
reply
From a business perspective, you being a straight shooter is the way to go. This way the customer always knows where they stand. A properly done job is easy to defend and the customer will be back as well as the fact that in today's time, with social media, everybody knows what you are doing. Good or Bad. Keep up the great work!
reply
Michael
Eric. Recently I had to change a 2004 cadillac deville secondary pump. When I took it apart it heated up melted and ruined the connector. what is the best connectors you would advise me to use. A wet tight connection Of course. Thank you Be well.
reply
Eric. Recently I had to change a 2004 cadillac deville secondary pump. When I took it apart it heated up melted and ruined the connector. what is the best connectors you would advise me to use. A wet tight connection Of course. Thank you Be well.
reply
Michael
Eric, Recently I had to change out a secondary air pump on 2004 4. 6 Northstar engine. The pump literally melted and there is no connector. What splicing connectors would you suggest? / Wet tight splice? Thank you.
reply
Eric, Recently I had to change out a secondary air pump on 2004 4. 6 Northstar engine. The pump literally melted and there is no connector. What splicing connectors would you suggest? / Wet tight splice? Thank you.
reply
Edward
Why is it ok to force fluid back into the master brake cylinder when compressing the piston back in the brake caliper. I wouldn't think the seals in the master cylinder would allow it without damaging them.
reply
Why is it ok to force fluid back into the master brake cylinder when compressing the piston back in the brake caliper. I wouldn't think the seals in the master cylinder would allow it without damaging them.
reply
Wellness
What did you spray on right before you put the tire back on at 15: 40? Is it to keep the tire rim from rusting onto the rotor? Yeah, I'm a break first-timer, and my victim is a 2002 Camry.
reply
What did you spray on right before you put the tire back on at 15: 40? Is it to keep the tire rim from rusting onto the rotor? Yeah, I'm a break first-timer, and my victim is a 2002 Camry.
reply
autos
Here's a question, Would there be a problem with the proportional valve if your back brakes are wearing out faster than the fronts? (2003 GMC Yukon XL 4WD all Disc Brakes)
reply
Here's a question, Would there be a problem with the proportional valve if your back brakes are wearing out faster than the fronts? (2003 GMC Yukon XL 4WD all Disc Brakes)
reply
Agora
In 3M site says plastic-to-plastic, plastic-to-metal, plastic-to-rubber, rubber-to-rubber, and rubber-to-metal areas.
Pin and caliper is meta-metal no?
reply
In 3M site says plastic-to-plastic, plastic-to-metal, plastic-to-rubber, rubber-to-rubber, and rubber-to-metal areas.
Pin and caliper is meta-metal no?
reply
Stab
3M is the worst silicone paste ever made. You may as well have used boogers and sand, what are you trying to do get us all Killed.
reply
3M is the worst silicone paste ever made. You may as well have used boogers and sand, what are you trying to do get us all Killed.
reply
Add a review, comment
Other channel videos
