Chevy Truck No Oil Pressure - P0523
video description
Date: 2020-08-05
Related videos
Comments and reviews: 9
Glenn
Bought a used 2006 Chevy 2500 6L pickup truck with 350000 kilometres on it. Oil pressure gauge was reading one degree above dead. I bought the truck for near nothing and I thought that I will change the oil pump. So I change the oil pump. New reading on the oil pressure gauge one degree above dead. Turns out that crank bearings were totally worn out. And there was no oil pressure.
reply
Bought a used 2006 Chevy 2500 6L pickup truck with 350000 kilometres on it. Oil pressure gauge was reading one degree above dead. I bought the truck for near nothing and I thought that I will change the oil pump. So I change the oil pump. New reading on the oil pressure gauge one degree above dead. Turns out that crank bearings were totally worn out. And there was no oil pressure.
reply
Robert
Like I always say, if you design it you should have to work on it. I work on diesel equipment and some of the crap I see is unreal. Who the hell designs a piece of equipment with a 4cylinder engine that takes 6 hours to do a valve adjustment. We do tier 4 emissions conversions and I tell my guy all the time put it where they can maintain it or it won't get maintained.
reply
Like I always say, if you design it you should have to work on it. I work on diesel equipment and some of the crap I see is unreal. Who the hell designs a piece of equipment with a 4cylinder engine that takes 6 hours to do a valve adjustment. We do tier 4 emissions conversions and I tell my guy all the time put it where they can maintain it or it won't get maintained.
reply
Notsofast
When are you going to disclose to us that every time we see your arms or hands doing a job that its your ASE certified stunt double?
We know this garage is fake like the buildings in old westerns.
You probably have gold trimmed mansion on the other side of the wall.
I dont care because the videos are very helpful.
Thanks
reply
When are you going to disclose to us that every time we see your arms or hands doing a job that its your ASE certified stunt double?
We know this garage is fake like the buildings in old westerns.
You probably have gold trimmed mansion on the other side of the wall.
I dont care because the videos are very helpful.
Thanks
reply
FULL
Also if the digital display in like the Escalades mess up, but the vehicle is running fine. If you pull that oil pressure sensor out, there's a little filter down there that you can replace or clean out and that little filter underneath the sensor gets plugged up. I just didn't want on a 2007 Escalade
reply
Also if the digital display in like the Escalades mess up, but the vehicle is running fine. If you pull that oil pressure sensor out, there's a little filter down there that you can replace or clean out and that little filter underneath the sensor gets plugged up. I just didn't want on a 2007 Escalade
reply
Billy
I had a similar issue. But mine was reading 20psi. Dealer wanted to charge me 500 to do it. I did it myself in 30 mins, with a Delco part. Cost me about 70 in total, tools and all. How do they get away with such prices? I keep the tools used handy, because the damn thing is bound to go out again.
reply
I had a similar issue. But mine was reading 20psi. Dealer wanted to charge me 500 to do it. I did it myself in 30 mins, with a Delco part. Cost me about 70 in total, tools and all. How do they get away with such prices? I keep the tools used handy, because the damn thing is bound to go out again.
reply
michael
When I was younger I had a 1958 Chevy Bel-air with 348cu. inch Put an oil pressure gage in and started it up. only hsd 20lbs of pressure. I found out that was standard for a 348 back then. Scared me to death. //// love your vids great work.
reply
When I was younger I had a 1958 Chevy Bel-air with 348cu. inch Put an oil pressure gage in and started it up. only hsd 20lbs of pressure. I found out that was standard for a 348 back then. Scared me to death. //// love your vids great work.
reply
Simon
I enjoy how you chase those wires down with knowledge, experience, savvy and Logic, but, my real Respect comes from getting your fingers dirty with no sissy surgical gloves, like a real mechanic. Thanks to your shows, I learned a lot.
reply
I enjoy how you chase those wires down with knowledge, experience, savvy and Logic, but, my real Respect comes from getting your fingers dirty with no sissy surgical gloves, like a real mechanic. Thanks to your shows, I learned a lot.
reply
mike
Thank you so much for your knowledge. My 2012 Yukon denali is not showing any pressure and giving off this same code and I'm scared to drive it even though it has oil and the engine isnt knocking
reply
Thank you so much for your knowledge. My 2012 Yukon denali is not showing any pressure and giving off this same code and I'm scared to drive it even though it has oil and the engine isnt knocking
reply
JAVY
i changed sensor, oil pick up tube O ring, new oil and lucas oil stabilizer and still have low pressure. 38 psi when driving and like 22 to 25 psi when stop. is it normal? 2011 tahoe ls 5. 3
reply
i changed sensor, oil pick up tube O ring, new oil and lucas oil stabilizer and still have low pressure. 38 psi when driving and like 22 to 25 psi when stop. is it normal? 2011 tahoe ls 5. 3
reply
Add a review, comment
Other channel videos
