No Low Beam Head Lamp - Chrysler Pacifica
video description
Lol. wow that headlight assembly is so tight! How do they expect a man's hand to fit in there? Or totally break down the assembly to reach the bulb? Engineers crack me up!
Ahhh. This is the Pacifica mentioned in other vids. the bad ground, etc. Lucky for you, otherwise you would've had to call Trinity back to change the bulb for you
Date: 2020-08-05
Related videos
Comments and reviews: 9
Vince
You're a lifesaver. Same thing happened on my 2010 Avenger today. Though passenger low beam was defunct. 12v at the socket but no light. Every single forum post I looked at suggested a new TIPM, but figured since I had voltage, it may have been a ground issue. Hoping to track it down tomorrow, or at the very least, splice a new one like you said. Your videos are simply so helpful for the every day wrencher. Thank you!
reply
You're a lifesaver. Same thing happened on my 2010 Avenger today. Though passenger low beam was defunct. 12v at the socket but no light. Every single forum post I looked at suggested a new TIPM, but figured since I had voltage, it may have been a ground issue. Hoping to track it down tomorrow, or at the very least, splice a new one like you said. Your videos are simply so helpful for the every day wrencher. Thank you!
reply
Ian
I know this is an older video, but I have an 04 chrysler just had the exact same problem. I googled saw your video and I thank you saved me hours of trying to read googled wiring diagrams, within minutes of seeing your video problem solved.
As a diy I thank you guys for these videos and effort you put in I truly hope there is some compensation to you in these processes for your time and effort. Thank you.
reply
I know this is an older video, but I have an 04 chrysler just had the exact same problem. I googled saw your video and I thank you saved me hours of trying to read googled wiring diagrams, within minutes of seeing your video problem solved.
As a diy I thank you guys for these videos and effort you put in I truly hope there is some compensation to you in these processes for your time and effort. Thank you.
reply
olsi
Hi Eric. You are great, thanks. I have a problem with my pacifica. Starting is perfect. engine runs great. when I turn off the ignition, then try to restart, everything resets. ie: radio to am 530, clock to 12: 00, heater controls to auto-hi. when I turn off the switch, everything goes dead. No interior lights, warning bell. What should be the problem? I appreciate it
reply
Hi Eric. You are great, thanks. I have a problem with my pacifica. Starting is perfect. engine runs great. when I turn off the ignition, then try to restart, everything resets. ie: radio to am 530, clock to 12: 00, heater controls to auto-hi. when I turn off the switch, everything goes dead. No interior lights, warning bell. What should be the problem? I appreciate it
reply
Chinook
Pacifica's are notorious for having ground wire problems. Anyone still driving one would be very wise to check all the grounds and clean them. (There are videos of where they are located. Also Eric O could had made this job a ton easier by simply removing the battery and battery tray first. That gives you EASY access to those grounds.
reply
Pacifica's are notorious for having ground wire problems. Anyone still driving one would be very wise to check all the grounds and clean them. (There are videos of where they are located. Also Eric O could had made this job a ton easier by simply removing the battery and battery tray first. That gives you EASY access to those grounds.
reply
Shaquitia
I believe that's wrong with my car, my car just keep blowing fuses/ ASD FUSE, I think it the same problem, and my ABS, E BRAKE, AND MY SIPPERY WENT WET LIGHT stays on when the car is on, it shut down on me yesterday on the main highway, can you tell me what you think the problem is, but great video, shows me a lot with my car
reply
I believe that's wrong with my car, my car just keep blowing fuses/ ASD FUSE, I think it the same problem, and my ABS, E BRAKE, AND MY SIPPERY WENT WET LIGHT stays on when the car is on, it shut down on me yesterday on the main highway, can you tell me what you think the problem is, but great video, shows me a lot with my car
reply
ANGRY
i have 2 cars with no high beams but low beams work. just 1 night highs went out & nvr worked again. tryed new bulbs but still no highs on either car! any ideas? its on my 89' probe gt & 93 probe SE. but dont have testers or have any idea how use anyway. also on my 89'-PGT fogs also went out same night
reply
i have 2 cars with no high beams but low beams work. just 1 night highs went out & nvr worked again. tryed new bulbs but still no highs on either car! any ideas? its on my 89' probe gt & 93 probe SE. but dont have testers or have any idea how use anyway. also on my 89'-PGT fogs also went out same night
reply
Rick
What was the back probe that you used?
Also I have a Chevy Colorado that the headlights quit working. The fuel pump has no power and ignition wont turn off sometimes.
I know they have pass lock issues! Any ideas?
Great video very in formative and a great tech.
reply
What was the back probe that you used?
Also I have a Chevy Colorado that the headlights quit working. The fuel pump has no power and ignition wont turn off sometimes.
I know they have pass lock issues! Any ideas?
Great video very in formative and a great tech.
reply
John
when you have a chance do you know where the head light and fog light relay is on a 07 monte. I fixed all of the wires and every thing but cant locate the relays for both because there not in the typical locations under the hood and the kick panel on the passenger side.
reply
when you have a chance do you know where the head light and fog light relay is on a 07 monte. I fixed all of the wires and every thing but cant locate the relays for both because there not in the typical locations under the hood and the kick panel on the passenger side.
reply
Mike
1998 Honda Civic LX here. Exact same problem: Both high beams work, but only right low beam works. Both low beam fuses are OK. The problem started the night that I got an oil change. Coincidence? Or perhaps the ground or bulb's low beam filament got knocked loose?
reply
1998 Honda Civic LX here. Exact same problem: Both high beams work, but only right low beam works. Both low beam fuses are OK. The problem started the night that I got an oil change. Coincidence? Or perhaps the ground or bulb's low beam filament got knocked loose?
reply
Add a review, comment
Other channel videos
